2008 Yamaha Big Bear 250 Specifications
Engine:
Engine configuration |
Single-Cylinder |
How many cylinders |
1 |
Types of power cycles |
Four-stroke |
Type of cooling system |
Air |
Valves |
2 |
Valves Per Cylinder |
2 |
Valve types and configurations |
Single Overhead Camshaft |
Bore (millimeters/inches) |
71 / 2.8 |
Stroke (millimeters/inches) |
58 / 2.29 |
Engine displacement (cubic centimeters/cubic inches) |
230 / 14 |
Compression Ratio |
8.7:1 |
Starter Type |
Electric / Pull |
Fuel |
Regular |
Type of Fuel |
Gas |
Carb Model |
Mikuni |
Injector |
– |
Carb |
+ |
Number Of Carburetors |
1 |
Carburetor Size (mm) |
33 |
Carburetor system |
Carb |
Governor (device) |
– |
Transmission:
Transmission Type |
Manual / Automatic Clutch |
Number Of Speeds |
5 |
Primary drive rear |
Shaft |
Primary Drive (Engine / Transmission) |
Belt |
Reverse |
+ |
High low range selector |
– |
Wheels & Tires: Front (F), Rear (R):
Rims material |
Steel |
F Tire Diameter |
22 |
R Tire Diameter |
22 |
Chromed |
– |
Tire Brand |
Maxxis® |
F Tire Width |
7 |
F Wheel Diameter |
10 |
R Tire Width |
10 |
R Wheel Diameter |
10 |
F Tire Brand |
Maxxis® AT22 x 7-10 |
R Tire Brand |
Maxxis® AT22 x 10-10 |
Brakes:
Front |
Dual Hydraulic Disc Brake |
Rear |
Sealed Drum |
Engine Braking |
Std |
Suspension: Front (F), Rear (R):
ATV F suspension system |
McPherson Strut |
F Travel (millimeters/inches) |
4.9 / 124.5 |
Front Adjustable Fork Pre-Load |
– |
Front Adjustable Rebound Damping |
– |
Front Central Suspension Strut |
– |
Steering Damper |
– |
F Stabilizer Bar |
– |
ATV R suspension system |
Swing Arm |
R Travel (inches/millimeters) |
5.3 / 134.6 |
Rear Adjustable Shock / Spring Pre-Load |
+ |
Rear Adjustable Rebound Damping |
– |
ATV R shock absorbers |
1 |
Rear Suspension Material |
Steel |
R Stabilizer Bar |
– |
Air Adjustable |
– |
Steering:
Steering system |
Manual |
Steering controller |
Handlebar |
Technical Specifications:
Overall length (foot) |
6.28 |
Overall width (inches/millimeters) |
40.9 / 1038.9 |
Overall heigth (inches/millimeters) |
44 / 1117.6 |
Wheelbase (in/mm) |
46.1 / 1170.9 |
Turning Radius (ft) |
9.5 |
Ground Clearance (in/mm) |
5.9 / 149.9 |
Length (foot/foot) |
6 |
Length (foot/inches) |
3.4 |
ATV dry weight (pounds/kilograms) |
456 / 206.8 |
Towing Capacity (lbs/kgs) |
728 / 330.2 |
Fuel tank capacity (gallons/liters) |
3.2 / 12.1 |
Engine Displacement to Weight (cc) |
0.5 |
Seats:
Seat Type |
One-Piece |
Seat adjusting system |
– |
Material |
Vinyl |
Seat Location |
Driver |
Folding seat |
– |
Seat Height (in/mm) |
30.7 / 779.8 |
ATV seats |
1 |
Exterior:
ATV frame material |
Steel |
Basic outside panels material |
Plastic |
Floor Board Location |
Driver |
ATV handlebar grips |
Std |
Foot Peg Location |
Driver |
Hand Guards |
– |
BrushGuard |
– |
LightGuard |
– |
Radiator Guard |
– |
CV Boot Cover |
– |
Shock Cover |
– |
Front Fender |
Std |
Rear Fender |
Std |
Hand grips |
Std |
Bar Pads |
Std |
Front Bumper |
Std |
Rear Bumper |
Std |
A-Arm Skid Plate (Front/Rear) |
No / No |
Bash Plate (Front/Rear) |
Yes / No |
SwingArm Skid Plate |
– |
Full Length Skid Plate |
– |
Pricing:
Basic warranty (Mo./Condition) |
6 / Limited |
Battery Warranty (Mo.) |
0 |
Identification:
ATV Type |
Utility |
Made in |
Japan |
Introduction Year |
2005 |
Minimum manufacturer age recommended |
16 |
Parent Company |
Yamaha |
Full name |
Big Bear 250 |
Towing & Hauling:
Tongue Weight (lbs/kgs) |
730 / 331.1 |
Drive Line:
Driveline Type |
4X2 |
Number Of Driveline Modes |
1 |
Rear Unlocking Differential |
– |
Rear Solid Axle |
+ |
Lights:
Headlight Mounts |
Std |
Halogen Headlight (s) |
Std |
Headlight (s) |
Std |
Type |
Halogen |
Storage:
Capacity (lbs/kgs) |
66 / 29.9 |
Paint & Finish: