2019 Suzuki KingQuad 400 FSi Specifications
Engine:
| Engine configuration |
Single-Cylinder |
| How many cylinders |
1 |
| Types of power cycles |
Four-stroke |
| Type of cooling system |
Air / Oil |
| Valves |
4 |
| Valves Per Cylinder |
4 |
| Valve types and configurations |
Single Overhead Camshaft |
| Bore (millimeters/inches) |
82 / 3.23 |
| Stroke (millimeters/inches) |
71.2 / 2.81 |
| Engine displacement (cubic centimeters/cubic inches) |
376 / 22.9 |
| Compression Ratio |
9:1 |
| Starter Type |
Electric |
| Fuel |
Regular |
| Type of Fuel |
Gas |
| Injector |
+ |
| Carburetor system |
Fuel Injected |
Transmission:
| Transmission Type |
Manual / Automatic Clutch |
| Number Of Speeds |
5 |
| Primary drive front |
Shaft |
| Reverse |
+ |
| High low range selector |
+ |
Wheels & Tires: Front (F), Rear (R):
| Rims material |
Steel |
| Tube / Tubeless |
Tubeless |
| F Tire Diameter |
25 |
| R Tire Diameter |
25 |
| Chromed |
– |
| Tire Brand |
Carlisle |
| F Tire Width |
8 |
| F Wheel Diameter |
12 |
| R Tire Width |
10 |
| R Wheel Diameter |
12 |
| F Tire Brand |
Carlisle AT 25 X 8-12 |
| R Tire Brand |
Carlisle AT 25 X 10-12 |
Brakes:
| Front |
Dual Hydraulic Disc Brake |
| Front Brake Diameter (inches/millimeters) |
7.5 / 190 |
| Rear |
Drum |
Suspension: Front (F), Rear (R):
| ATV F suspension system |
Independent Double A-Arm |
| F Travel (millimeters/inches) |
6.7 / 170.1 |
| Front Adjustable Fork Pre-Load |
– |
| Front Adjustable Rebound Damping |
– |
| Front Central Suspension Strut |
– |
| Steering Damper |
– |
| F Stabilizer Bar |
– |
| ATV R suspension system |
Swing Arm |
| R Travel (inches/millimeters) |
6.7 / 170.1 |
| Rear Adjustable Shock / Spring Pre-Load |
– |
| Rear Adjustable Rebound Damping |
– |
| ATV R shock absorbers |
2 |
| R Stabilizer Bar |
– |
| Air Adjustable |
– |
Steering:
| Steering system |
Manual |
| Steering controller |
Handlebar |
Technical Specifications:
| Overall length (foot) |
6.76 |
| Overall width (inches/millimeters) |
45.1 / 1145 |
| Overall heigth (inches/millimeters) |
48 / 1220 |
| Wheelbase (in/mm) |
50 / 1270 |
| Ground Clearance (in/mm) |
9.8 / 250 |
| Length (foot/foot) |
6 |
| Length (foot/inches) |
9.1 |
| ATV wet weight (pounds/kilograms) |
615 / 279 |
| Fuel tank capacity (gallons/liters) |
4.2 / 16 |
| Performance |
Std |
Seats:
| Seat Type |
One-Piece |
| Seat adjusting system |
– |
| Material |
Vinyl |
| Seat Location |
Driver |
| Seat Height (in/mm) |
33.1 / 840 |
| ATV seats |
1 |
Exterior:
| ATV frame material |
Steel |
| Basic outside panels material |
Plastic |
| Floor Board Location |
Driver |
| ATV handlebar grips |
Std |
| Hand Guards |
– |
| BrushGuard |
+ |
| LightGuard |
– |
| Radiator Guard |
+ |
| CV Boot Cover |
– |
| Shock Cover |
– |
| Front Fender |
Std |
| Rear Fender |
Std |
| Hand grips |
Std |
| Front Bumper |
Std |
| Front Fender Flairs |
Std |
| Rear Fender Flairs |
Std |
| A-Arm Skid Plate (Rear) |
– |
| Bash Plate (Front/Rear) |
Yes / No |
| Full Length Skid Plate |
+ |
Instrumentation:
| Digital Instrumentation |
Std |
| Clock |
Std |
| Odometer |
Std |
| Speedometer |
Std |
| HourMeter |
Std |
| Over temperature indicator |
Light |
| Low fuel level indicator |
Gauge |
Pricing:
| Warranty (Condition) |
Limited |
| Destination Charge |
380 |
| Battery Warranty (Mo.) |
0 |
Identification:
| ATV Type |
Utility |
| Made in |
Japan |
| Introduction Year |
2008 |
| Minimum manufacturer age recommended |
16 |
| Parent Company |
Suzuki |
| Full name |
KingQuad 400FSi |
Mounts:
Drive Line:
| Driveline Type |
Selectable 4X2 / 4X4 |
| Number Of Driveline Modes |
2 |
| Rear Unlocking Differential |
– |
| Rear Solid Axle |
+ |
| Limited Slip Differential Location |
Front |
Convenience:
Storage:
| Number Of Side Cases |
0 |
| Number Of Saddle Bags |
0 |
| Underseat Storage |
Std |
| Rear Rack |
Std |
| Front Rack |
Std |
Lights:
| Headlight Mounts |
Std |
| Halogen Headlight (s) |
Std |
| Headlight (s) |
Std |
| Type |
Halogen |
Paint & Finish: