2020 Suzuki KingQuad 400 ASi Camo Specifications
Engine:
Engine configuration |
Single-Cylinder |
How many cylinders |
1 |
Types of power cycles |
Four-stroke |
Type of cooling system |
Air / Oil |
Valves |
4 |
Valves Per Cylinder |
4 |
Valve types and configurations |
Single Overhead Camshaft |
Bore (millimeters/inches) |
82 / 3.23 |
Stroke (millimeters/inches) |
71.2 / 2.81 |
Engine displacement (cubic centimeters/cubic inches) |
376 / 22.9 |
Compression Ratio |
9:1 |
Starter Type |
Electric |
Fuel |
Regular |
Type of Fuel |
Gas |
Injector |
+ |
Carburetor system |
Fuel Injected |
Transmission:
Transmission Type |
CVT |
Primary drive front |
Shaft |
Primary Drive (Engine / Transmission) |
Belt |
Reverse |
+ |
Transmission Brand |
Quadmatic™ |
High low range selector |
+ |
Wheels & Tires: Front (F), Rear (R):
Rims material |
Steel |
Tube / Tubeless |
Tubeless |
F Tire Diameter |
25 |
R Tire Diameter |
25 |
Chromed |
– |
Tire Brand |
Carlisle |
F Tire Width |
8 |
F Wheel Diameter |
12 |
R Tire Width |
10 |
R Wheel Diameter |
12 |
F Tire Brand |
Carlisle AT 25 X 8-12 |
R Tire Brand |
Carlisle AT 25 X 10-12 |
Brakes:
Front |
Dual Hydraulic Disc Brake |
Front Brake Diameter (inches/millimeters) |
7.5 / 190 |
Rear |
Drum |
Engine Braking Brand Name |
Engine Braking System |
Suspension: Front (F), Rear (R):
ATV F suspension system |
Independent Double A-Arm |
F Travel (millimeters/inches) |
6.7 / 170.1 |
Front Adjustable Fork Pre-Load |
– |
Front Adjustable Rebound Damping |
– |
Front Central Suspension Strut |
– |
Steering Damper |
– |
F Stabilizer Bar |
– |
ATV R suspension system |
Swing Arm |
R Travel (inches/millimeters) |
6.7 / 170.1 |
Rear Adjustable Shock / Spring Pre-Load |
– |
Rear Adjustable Rebound Damping |
– |
ATV R shock absorbers |
2 |
R Stabilizer Bar |
– |
Air Adjustable |
– |
Steering:
Steering system |
Manual |
Steering controller |
Handlebar |
Technical Specifications:
Overall length (foot) |
6.76 |
Overall width (inches/millimeters) |
45.1 / 1145 |
Overall heigth (inches/millimeters) |
48 / 1220 |
Wheelbase (in/mm) |
50 / 1270 |
Ground Clearance (in/mm) |
9.8 / 250 |
Length (foot/foot) |
6 |
Length (foot/inches) |
9.1 |
ATV wet weight (pounds/kilograms) |
628 / 285 |
Fuel tank capacity (gallons/liters) |
4.2 / 16 |
Performance |
Std |
Seats:
Seat Type |
One-Piece |
Seat adjusting system |
– |
Material |
Vinyl |
Seat Location |
Driver |
Seat Height (in/mm) |
33.1 / 840 |
ATV seats |
1 |
Exterior:
ATV frame material |
Steel |
Basic outside panels material |
Plastic |
Floor Board Location |
Driver |
ATV handlebar grips |
Std |
Hand Guards |
– |
BrushGuard |
+ |
LightGuard |
– |
Radiator Guard |
+ |
CV Boot Cover |
– |
Shock Cover |
– |
Front Fender |
Std |
Rear Fender |
Std |
Hand grips |
Std |
Front Bumper |
Std |
Front Fender Flairs |
Std |
Rear Fender Flairs |
Std |
A-Arm Skid Plate (Rear) |
– |
Bash Plate (Front/Rear) |
Yes / No |
Full Length Skid Plate |
+ |
Instrumentation:
Digital Instrumentation |
Std |
Clock |
Std |
Odometer |
Std |
Speedometer |
Std |
HourMeter |
Std |
Over temperature indicator |
Light |
Low fuel level indicator |
Gauge |
Pricing:
Warranty (Condition) |
Limited |
Destination Charge |
395 |
Battery Warranty (Mo.) |
0 |
Identification:
ATV Type |
Utility |
Made in |
Japan |
Introduction Year |
2008 |
Minimum manufacturer age recommended |
16 |
Parent Company |
Suzuki |
Full name |
KingQuad 400ASi Camo |
Representative Image |
– |
Mounts:
Drive Line:
Driveline Type |
Selectable 4X2 / 4X4 |
Number Of Driveline Modes |
2 |
Rear Unlocking Differential |
– |
Rear Solid Axle |
+ |
Limited Slip Differential Location |
Front |
Convenience:
Storage:
Number Of Side Cases |
0 |
Number Of Saddle Bags |
0 |
Underseat Storage |
Std |
Rear Rack |
Std |
Front Rack |
Std |
Lights:
Headlight Mounts |
Std |
Halogen Headlight (s) |
Std |
Headlight (s) |
Std |
Type |
Halogen |
Paint & Finish: