2021, 2022, 2023 Kawasaki Mule SX™ FI 4×4 SE Specifications
Engine:
Engine configuration |
Single-Cylinder |
How many cylinders |
1 |
Types of power cycles |
Four-stroke |
Torque (Ft Lbs/Nm) |
21.7 / 29.4 |
Torque RPM |
2400 |
Type of cooling system |
Air / Fan |
Valves |
2 |
Valves Per Cylinder |
2 |
Valve types and configurations |
OHV |
Bore (millimeters/inches) |
82 / 3.23 |
Stroke (millimeters/inches) |
76 / 2.99 |
Engine displacement (cubic centimeters/cubic inches) |
401 / 24.5 |
Compression Ratio |
8.6:1 |
Starter Type |
Electric |
Fuel |
Regular |
Type of Fuel |
Gas |
Injector |
+ |
Fuel Injector Size (mm) |
23 |
Carb |
– |
Number Of Carburetors |
0 |
Carburetor system |
Fuel Injected |
Governor (device) |
+ |
Snorkel Air Intake |
Std |
Transmission:
Transmission Type |
CVT |
Primary drive front |
Shaft |
Primary Drive (Engine / Transmission) |
Belt |
Reverse |
+ |
High low range selector |
+ |
Wheels & Tires: Front (F), Rear (R):
Rims material |
Steel |
Tube / Tubeless |
Tubeless |
F Tire Diameter |
24 |
R Tire Diameter |
24 |
Tire Brand |
Duro |
F Tire Width |
9 |
F Wheel Diameter |
10 |
R Tire Width |
11 |
R Wheel Diameter |
10 |
F Tire Brand |
Duro: 24 x 9-10 |
R Tire Brand |
Duro: 24 x 11-10 |
Brakes:
Front |
Sealed Hydraulic Drum Brake |
Rear |
Sealed Hydraulic Drum Brake |
Suspension: Front (F), Rear (R):
ATV F suspension system |
McPherson Strut |
F Travel (millimeters/inches) |
3.1 / 78.7 |
ATV R suspension system |
Swing Arm |
R Travel (inches/millimeters) |
3.1 / 78.7 |
Rear Adjustable Shock / Spring Pre-Load |
+ |
ATV R shock absorbers |
2 |
Adjustment Type |
Shock Mounted Adjustment |
Air Adjustable |
– |
Steering:
Steering system |
Rack & Pinion |
Steering controller |
Steering Wheel |
Tilt Steering |
Std |
Technical Specifications:
Overall length (foot) |
8.89 |
Overall width (inches/millimeters) |
52.6 / 1336 |
Overall heigth (inches/millimeters) |
70.9 / 1800.9 |
Wheelbase (in/mm) |
70.1 / 1780.5 |
Turning Radius (ft) |
10.8 |
Ground Clearance (in/mm) |
6.7 / 170.2 |
Length (foot/foot) |
8 |
Length (foot/inches) |
10.7 |
ATV wet weight (pounds/kilograms) |
1031.9 / 468.1 |
Payload Capacity (lbs/kgs) |
906 / 411 |
Towing Capacity (lbs/kgs) |
1100 / 499 |
Fuel tank capacity (gallons/liters) |
4.2 / 15.9 |
Performance |
Std |
Seats:
Seat Type |
Bench |
Material |
Vinyl |
Folding seat |
+ |
ATV seats |
2 |
ATV rows |
1 |
Grab Rail or Strap |
Std |
Exterior:
ATV frame material |
Steel |
Basic outside panels material |
Plastic |
ChainGuard |
– |
BrushGuard |
– |
LightGuard |
– |
Front MudGuards |
+ |
Rear MudGuards |
– |
CV Boot Cover |
– |
Front Bumper |
Std |
Front Fender Flairs |
Std |
Rear Fender Flairs |
Std |
Bash Plate (Front) |
+ |
Cab Cage |
Std |
Cab Rollbar |
Std |
Cab / Bed Divider |
Std |
Instrumentation:
Oil Pressure Gauge |
Std |
HourMeter |
Std |
Over temperature indicator |
Light |
Low fuel level indicator |
Gauge |
Pricing:
Warranty (Condition) |
Limited |
Destination Charge |
670 |
Battery Warranty (Mo.) |
0 |
Identification:
ATV Type |
Utility |
Made in |
Japan |
Introduction Year |
2017 |
Parent Company |
Kawasaki |
Full name |
Mule SX™ 4×4 SE FI |
Representative Image |
– |
Drive Line:
Driveline Type |
Selectable 4X2 / 4X4 |
Number Of Driveline Modes |
2 |
Rear Unlocking Differential |
+ |
Limited Slip Differential Location |
Front |
Differential Lock Location |
Rear |
Paint & Finish:
Convenience:
Power Outlet |
Std |
Seat Belts |
Std |
Storage:
Number Of Cupholders |
2 |
Rack Rails Location |
Cargo Bed |
Bed Length (in/mm) |
35.6 / 904.2 |
Bed Height (in/mm) |
9.6 / 243.8 |
Bed Width (in/mm) |
40.9 / 1038.9 |
Bed Capacity (lbs./kgs.) |
400 / 181.4 |
Cargo Bed Tilt |
+ |
Cargo Bed Material |
Steel |
Bed Volume (ft3/m3) |
8.1 / 0.2 |
Integral Tie-Down Hooks |
+ |
Glove Box / Dash Storage |
Std |
Front Storage Well |
Std |
Cargo Bed Liner |
Std |
Lights:
Headlight Mounts |
Std |
Halogen Headlight (s) |
Std |
Tail Light / Brake Light |
Std |
Headlight (s) |
Std |
Type |
Halogen |